Main Technical Parameters
Input voltage:100-140V
AC Frequency:50/60Hz
Operating Temperature:Less than 60
Relative Humidity: Less than 85%
Maximum Power of applied Motor: Less than 0.6A
Controller Output Gear: According to material object
Maximum Power of Applied Light: Less than 100W
Properties of Lights in Controller: Relay contact on/off
Wireless Transmission Mode:Radio Frequency (RF)
Radio Frequency Band: 433.92MHz
Remote Control Range:30m

Cautions
(a)When the new device can’t be remote controlled, Please check to see whether the bar codes in emitter and receiver are consistent, whether the indicator light on the emitter is working, whether the cable of receiver is connected properly and whether the buzzer beeps once when Power is on.
(b)When the receiver can't be controller by emitter, please checking to see whether the battery contact normally and whether the Power is enough, Please replace battery(12V/23A) in time when it is out of power.
(c)Insensitive remote controlling probably because of interfering environment and the low battery.
(d)Please remove battery when it isn't in used for a long time.
(e)Please wiring properly in strict accordance with parameters on labels. Otherwise it will directly shorten life of this device or cause malfunction immediately. The antenna mustn't connect with other wires.
(f)When these is a code switch on fan, please turn the fan to the highest gear before remote controlling.
(g)This product does not include A23 battery, 12V batteries in package.

Package(Battery not include)
1* Receiver
1* Handheld Remote
1* Wall Mount
1* Screw
1*Paper description